The safety labels consist of an easily destroyable foil material, which was developed particularly for the transmission-safe marking. Sufficiently large labels can be solved with normal gluing not in a piece, but fraying out and/or split up. By this destruction a transmission of labels is not possible on other undergrounds. The special surface coating is suitable very well for the inscription in the thermal transfer printing procedure. The labels are suitable therefore in particular for safety's applications with a document like character, like e.g. inspection labels, building group marking under warranty or catch seal. The optical appearance and the stability depend on the used ribbon. In order to obtain an optimal print format, print rate and the transmission temperature of the heating border must be varied if necessary. We recommend that you test all labels in the end use application before purchasing. Samples are usually available at no charge upon request.
- Material:
- document foil
- Color:
- white
- Thickness film:
- 50 µm
- Adhesive:
- permanent pressure senstitive acrylic adhesive
- Service temp.:
- from -40 °F to +176 °F (-40 °C to +80 °C)
- Application temp.:
- min. +50 °F (min. +10 °C)
- Properties:
- resistant to water, salt water, alcohol and conventional household cleaners
- Country of origin:
- EU (Germany)
- Customs tariff number:
- 3919 1031
- Ribbon quality:
- K500 (suitable for excellent printing results)
