Silver matt polyester labels with backside metallization and tamper proof feature "checkerboard". The surface is covered with a topcoat designed for thermal transfer printing. Once applied to the substrate on removal, an irreversible "checkerboard" footprint message will detach itself from the face film. Labels which have been removed cannot be reapplied since repositioning will leave visible proof that tampering has taken place. Thanks to the special surface coating, excellent results can be achieved with thermal transfer printers equipped with conventional or near-edge print heads and using pure resin or wax / resin ribbons. Typical applications include name plate labels which show tampering and should not be re-usable. The adhesive is recommended for low surface energy substrates, like some plastics, powder coatings. The void effect is functional on some rough plastic substrates as well. This safety effect is ensured only up to a temperature of +40 °C. For special requirements we strongly recommend application tests on the original substrate, under real conditions. Samples are usually available at no charge upon request.
- Material:
- self-adhesive polyester checkerboard labels
- Color:
- silver, matt
- Thickness film:
- 50 µm ± 10% (ISO534)
- Adhesive:
- high strength permanent acrylic adhesive
- Service temp.:
- from -40 °F to +302 °F (-40 °C to +150 °C)
- Application temp.:
- min. +50 °F (min. +10 °C)
- Properties:
- self adhesive labels, which leave a chessboard pattern on the underground during separation, which cannot be removed. The labels are resistant to water, Alkohol, Oil and conventional household cleaners
- Country of origin:
- EU (Germany)
- Customs tariff number:
- 3919 1031
- Ribbon quality:
- K500 (suitable for excellent printing results)
