Direct thermal labels on roll with 3 inch core

Direct thermal labels on roll with 3 inch core for individual printing on in the direct thermal label printer. These economical direct thermal labels are printed on without ribbon. These direct thermal labels consist of white paper without cellulose and can be used for universal and economical marking, with short term length of application, low contamination load and smaller requirements to the stability. The adhesive corresponds to the requirements after FDA 175,105 and the recommendations XIV of the BfR (Federal Institute for risk evaluation). It can be used for the direct contact with dry, not greasing food. Application e.g. as bar code and packing labels or for industrial purposes such as storage and logistics. By the very good rigidity of the material it is outstanding suitable for the automatic donating. We recommend that you test all labels in the end use application before purchasing. Samples are usually available at no charge upon request.

Material:

direct thermal paper labels

Color:

white

Thickness film:

71µm ± 5 µm (ISO534)

Adhesive:

permanent pressure senstitive acrylic adhesive

Adhesion:

700 N/m on glas

Service temp.:

from -4 °F to +122 °F (-20 °C to +50 °C)

Properties:

excellent print quality and good image resolution; the image can be written by moisture, UV or neonlight gatively influenced; at temperatures above +122 °F (+50 °C), a premature darkness

Country of origin:

EU (Germany)

Customs tariff number:

4821 9010