Applicator A 1000

Print and apply in real-time - The applicator A 1000 represents, in combination with the thermal printers A2+, A4+ and A6+, the inexpensive solution both for semi-automatic labeling and for the integration into automated production lines. Long operation lines: The guides have ball bearings which avoid abrasion. Variable product heights: With the pneumatic cylinder it is possible to compensate differences in product heights. It is available in different heights of stroke. Simple adjustment: Four screws are needed to adjust the tamp pad to the dispensing edge. The processing can be optimized at the operator panel during the testing. Pre-dispense key: Tests the labelling function. At the first operation the label is printed and then transferred via the applicator. By pushing the button again the label is applied. Air service unit: The mounting takes place directly on the printer. The micro strainer prevents contamination, the compressed air regulator guarantees the labelling quality. High process reliability: The supporting air jet streaming, the vacuum and the speed of the cylinder are adjustable. For highly sensitive products and packaging the pressure to apply labels can be reduced to less than 1 kg. Consequently there is no risk of injury. To avoid contamination within the vacuum channels are cleaned by an air pressure impulse at the end of each application. Real time labelling: Labels with a height of 0.98" - 7.87" and with a width of 0.98" - 6.93" can be applied. Quick assembly: Like any other accessory, the applicator is plugged into the printer with two stoppers and can be fixed with only one screw. Digital I/O-Interface: The master (e.g. PLC) starts or stops the labelling process. The status and error messages are issued at the same time.

Customs Tariff Number:

8473 5090

Country of Origin:

EU (Germany)

Label tranfer method	Tamp	Roll on	Blow
Label width (inch)	0.98 - 6.93	0.98 - 6.93	0.98 - 6.93
Label height (inch)	0.98 - 7.87	3.15 - 7.87	0.98 - 3.94
Cylinder stroke (inch)	8.66 / 11.81
Stroke of tamp below printer (inch)	2.76 / 5.91
Compressed air (bar)	4 - 8
Product surface	flat
Product height (variabel)			-
Product height (fest)	-	-
Product fixed		-
Product linear movement	-