Cut in necessary length transparent heat shrink tube 3:1 ratio

The halogen reduced, transparent heat shrink tube is outstanding to the protection of markings on lines and cables, if the coated components have to remain protected and visible. Thin-walled heat shrinkage hoses are used universally, they do not lay on and keep flexible also after shrinking. The shrinkage hoses can be ordered cut in the necessary length. The advantage: You save a processing step and there is no need for any additional tools.

Material:

thin-walled, cross-linked polyolefin

Color:

transparent

Shrink rate:

3:1

Shrink temperature:

min. +158 °F (+70 °C), complete shrink temp. +221 °F (+105 °C)

Service temperature:

-67 °F (-55 °C) to +221 °F (+105 °C)

Longitudinal shrinkage ratio:

≥ 5%

Tensile strength:

≥ 10,4 MPa (Testing method GB/T 1040)

Elongation at break:

≥ 200% (Testing method GB/T 1040)

Dielectric strenght:

≥ 15 kV/mm (Testing method GB/T 1408)

Contact resistance:

≥ 10¹⁴ Ω / cm (Testing method GB/T 1410)

Properties:

halogen reduced, multifunctional universal shrinkage hose, good resistance to chemicals