The cab eos4 label printer may be used in either direct thermal or thermal transfer mode. Outstanding is that the printer ist fitted with a touchscreen as standard which makes ist exceptional easy to use. The eos4 can be used without being connected to a PC. It's easy to call up existing labels, add data and print them off. Labels can be saved either to a USB memory stick or on the internal 16MB memory of the printer. The EOS4 can accommodate label rolls up to 200mm in diameters which are centered automatically. The Printer is available with 200 or 300 dpi resolution. Wear parts can usually be replaced in a matter of seconds without the need of tools. The eos4 will be delivered with the full version of the label software cablabel R2+.
| Printer parameters |
|
| Model: |
| (CAB EOS4/200) with 200 dpi Printhead |
(CAB EOS4/300) with 300 dpi Printhead |
|
| Printer Technology: |
thermal transfer and direct thermal |
| Print Resolution: |
|
| max. Print width: |
|
| max. Printspeed: |
|
| Label |
|
| max. Roll Size (outside diameter): |
203,2 mm |
| Label width: |
10 - 116 mm |
| Label height: |
5 - 1000 mm |
| Ribbon |
| max. Ribbon length: |
variable length up to: 360 m |
| Ribbon Setup: |
outside or inside |
| Connectivity |
| Interfaces: |
USB 2.0 Full Speed Slave for PC, Ethernet 10/100 Base T ,
3x USB Master for external control panel, keyboard, scanner, service key |
| Others |
| Memory: |
16 MB Flash, 64 MB RAM |
| Processor high speed: |
400 MHz |
| Product contents: |
label software cablabel R2+, drivers for Windows |
